|
Canon Printer Error Codes
| MODEL |
ERROR CODE |
MOST LIKELY CAUSE | | 155 |
E0 |
The fusing unit does not heat up | | 155 |
E1 |
The sensor motor or sensor, the DC controller on the
main board DC controller | | 155 |
E2 |
The copyboard position sensor | | 155 |
E4 |
Main motor, Main motor PCB, DC controller | | 155 |
E5 |
Lens home position error | | 155 |
E6 |
Exposure lamp control PCB, light intensity error, DC
controller | | 155 |
E7 |
Main motor PCB, DC controller | | 155 |
E8 |
Counter error | | 155 |
E9 |
AC drive board, DC controller | | 155 |
EC |
Copy board drive lock | | 155 |
ED |
Operation panel | | 155 |
EE |
Main motor drive board, DC drive board | | FC330 |
E0 |
The fusing unit does not heat up | | FC330 |
E1 |
Fusing film damaged or out of position | | FC330 |
E2 |
Copy board drive lock or home position error | | FC330 |
E6 |
Blown exposure lamp or exposure lamp terminals bad
contact | | 720, 740, 750, 770 |
C |
Fusing film damaged or out of position the machine
tries to compensate | | 720, 740, 750, 770 |
H |
Fusing unit overheating | | 720, 740, 750, 770 |
E0 |
The machine was switched OFF and ON after one of the
E00X error codes | | 720, 740, 750, 770 |
E000 |
Bad thermistor, thermofuse, fusing element, triac or
power supply | | 720, 740, 750, 770 |
E001 |
Bad thermistor, triac or power supply | | 720, 740, 750, 770 |
E002 |
bad thermistor, thermofuse, fusing element, triac or
power supply | | 720, 740, 750, 770 |
E003 |
bad thermistor, thermofuse, fusing element, triac or
power supply | | 720, 740, 750, 770 |
E007 |
fusing film damaged or out of position | | 720, 740, 750, 770 |
E010 |
main motor lock, DC power supply | | 720, 740, 750, 770 |
E064 |
Main power supply or Main PCB | | 720, 740, 750, 770 |
E202 |
scanner home position not found | | 720, 740, 750, 770 |
E210 |
lens home position not found | | 720, 740, 750, 770 |
E220 |
exposure lamp, exposure control PCB, light intensity
error, main PCB | | 720, 740, 750, 770 |
E240 |
DC power source controller or main power supply | | 720, 740, 750, 770 |
E261 |
frequency error caused by the main power supply or
the power outlet | | 720, 740, 750, 770 |
E803 |
main board, main power supply or fusing lamp defective | | NP1010, NP1020 |
E000 |
Bad thermistor, thermofuse, fusing element, triac or
power supply | | NP1010, NP1020 |
E001 |
Bad thermistor, triac or power supply | | NP1010, NP1020 |
E010 |
main motor lock, main motor rotation sensor,main board | | NP1010, NP1020 |
E210 |
lens or scanner home position not found | | 2020, 2120 |
E000 |
cuptorul nu se incalzeste | | 2020, 2120 |
E001 |
Bad thermistor, triac, SSR or power supply | | 2020, 2120 |
E030 |
Counter error | | 2020, 2120 |
E202 |
scanner home position not found | | 2020, 2120 |
E210 |
lens home position not found | | 2020, 2120 |
E400 |
ADF problem | | 2020, 2120 |
00-53 |
Sorter communication down | | 2020, 2120 |
E710 |
main board | | 3030, 3050 |
E000 |
Fusing unit not heating up | | 3030, 3050 |
E001 |
Fusing unit overheating | | 3030, 3050 |
E002 |
Fusing unit not heating up | | 3030, 3050 |
E003 |
Fusing unit not heating up | | 3030, 3050 |
E004 |
SSR or exposure lamp board | | 3030, 3050 |
E010 |
main motor lock, main motor rotation sensor,main board | | 3030, 3050 |
E022 |
development unit replacement error | | 3030, 3050 |
E030 |
Counter error | | 3030, 3050 |
E202 |
scanner home position not found | | 3030, 3050 |
E204 |
scanner home position not found | | 3030, 3050 |
E210 |
lens home position not found | | 3030, 3050 |
E220 |
exposure lamp blown or bad contact | | 3030, 3050 |
E400 |
ADF control board problem | | 3030, 3050 |
E401 |
DF paper feed motor lock | | 3030, 3050 |
E402 |
DF transport error | | 3030, 3050 |
E403 |
DF paper transport error | | 3030, 3050 |
E404 |
DF paper exit | | 3030, 3050 |
E411 |
DF sensors problem | | 3030, 3050 |
E500 |
Sorter control board | | 3030, 3050 |
E510 |
Sorter paper transport error | | 3030, 3050 |
E512 |
Sorter first motor lock | | 3030, 3050 |
E514 |
Sorter second motor lock | | 3030, 3050 |
E520 |
Stacker motor overloaded | | 3030, 3050 |
E530 |
Sorter V motor lock | | 3030, 3050 |
E531 |
Stapler motor overloaded | | 3030, 3050 |
E535 |
Sorter V motor lock | | 3030, 3050 |
E540 |
lateral movement motor lock | | 3030, 3050 |
E541 |
lateral movement motor lock | | 3030, 3050 |
E710 |
main board failure | | 3030, 3050 |
E711 |
main board failure | | 3030, 3050 |
E712 |
main board failure | | 3030, 3050 |
E800 |
emergency shut-off relay | | 3325, 3825 |
E000 |
Fusing unit not heating up | | 3325, 3825 |
E001 |
Fusing unit overheating | | 3325, 3825 |
E002 |
Fusing unit not heating up | | 3325, 3825 |
E003 |
Fusing unit not heating up | | 3325, 3825 |
E004 |
SSR or exposure lamp board | | 3325, 3825 |
E010 |
main motor lock, main motor rotation sensor,main board | | 3325, 3825 |
E022 |
development unit replacement error | | 3325, 3825 |
E030 |
Counter error | | 3325, 3825 |
E202 |
scanner home position not found | | 3325, 3825 |
E204 |
scanner home position not found | | 3325, 3825 |
E210 |
lens home position not found | | 3325, 3825 |
E220 |
exposure lamp blown or bad contact | | 3325, 3825 |
E400 |
ADF control board problem | | 3325, 3825 |
E401 |
DF paper feed motor lock | | 3325, 3825 |
E402 |
DF transport error | | 3325, 3825 |
E403 |
DF paper transport error | | 3325, 3825 |
E404 |
DF paper exit | | 3325, 3825 |
E411 |
DF sensors problem | | 3325, 3825 |
E500 |
Sorter control board | | 3325, 3825 |
E510 |
Sorter paper transport error | | 3325, 3825 |
E512 |
Sorter first motor lock | | 3325, 3825 |
E514 |
Sorter second motor lock | | 3325, 3825 |
E520 |
Stacker motor overloaded | | 3325, 3825 |
E530 |
Sorter V motor lock | | 3325, 3825 |
E531 |
Stapler motor overloaded | | 3325, 3825 |
E535 |
Sorter V motor lock | | 3325, 3825 |
E540 |
lateral movement motor lock | | 3325, 3825 |
E541 |
lateral movement motor lock | | 3325, 3825 |
E710 |
main board failure | | 3325, 3825 |
E711 |
main board failure | | 3325, 3825 |
E712 |
main board failure | | 3325, 3825 |
E800 |
emergency shut-off relay | | 4050, 4080 |
E000 |
Fusing unit not heating up | | 4050, 4080 |
E001 |
Fusing unit overheating | | 4050, 4080 |
E002 |
Fusing unit not heating up | | 4050, 4080 |
E003 |
Fusing unit not heating up | | 4050, 4080 |
E004 |
SSR or exposure lamp board | | 4050, 4080 |
E010 |
main motor lock, main motor rotation sensor,main board | | 4050, 4080 |
E022 |
development unit replacement error | | 4050, 4080 |
E030 |
Counter error | | 4050, 4080 |
E080 |
color interface problem | | 4050, 4080 |
E081 |
vertical transport motor overload | | 4050, 4080 |
E082 |
horizontal transport motor overload | | 4050, 4080 |
E084 |
color unit sensor | | 4050, 4080 |
E085 |
color unit position error | | 4050, 4080 |
E086 |
color unit position error | | 4050, 4080 |
E089 |
color unit position error | | 4050, 4080 |
E100 |
laser error | | 4050, 4080 |
E110 |
polygonal mirror motor not picking up speed | | 4050, 4080 |
E202 |
scanner home position not found | | 4050, 4080 |
E204 |
scanner home position not found | | 4050, 4080 |
E210 |
lens home position not found | | 4050, 4080 |
E220 |
exposure lamp blown or bad contact | | 4050, 4080 |
E223 |
color filter motor lock | | 4050, 4080 |
E240 |
main board | | 4050, 4080 |
E400 |
ADF control board problem | | 4050, 4080 |
E401 |
DF paper feed motor lock | | 4050, 4080 |
E402 |
DF transport error | | 4050, 4080 |
E403 |
DF paper transport error | | 4050, 4080 |
E404 |
DF paper exit | | 4050, 4080 |
E411 |
DF sensors problem | | 4050, 4080 |
E500 |
Sorter control board | | 4050, 4080 |
E510 |
Sorter paper transport error | | 4050, 4080 |
E512 |
Sorter first motor lock | | 4050, 4080 |
E514 |
Sorter second motor lock | | 4050, 4080 |
E520 |
Stacker motor overloaded | | 4050, 4080 |
E530 |
Sorter V motor lock | | 4050, 4080 |
E531 |
Stapler motor overloaded | | 4050, 4080 |
E535 |
Sorter V motor lock | | 4050, 4080 |
E540 |
lateral movement motor lock | | 4050, 4080 |
E541 |
lateral movement motor lock | | 4050, 4080 |
E660 |
IC card malfunction | | 4050, 4080 |
E710 |
main board failure | | 4050, 4080 |
E711 |
main board failure | | 4050, 4080 |
E712 |
main board failure | | 4050, 4080 |
E714 |
main board failure | | 4050, 4080 |
E800 |
emergency shut-off relay | | 6030 |
E000 |
Fusing unit not heating up | | 6030 |
E001 |
Fusing unit overheating | | 6030 |
E002 |
Fusing unit not heating up | | 6030 |
E003 |
Fusing unit not heating up | | 6030 |
E004 |
SSR or exposure lamp board | | 6030 |
E010 |
main motor lock, main motor rotation sensor,main board | | 6030 |
E022 |
development unit replacement error | | 6030 |
E030 |
B&W counter error | | 6030 |
E031 |
Color counter error | | 6030 |
E064 |
AC drive board problem | | 6030 |
E065 |
AC drive board problem | | 6030 |
E202 |
scanner home position not found | | 6030 |
E203 |
scanner home position not found | | 6030 |
E204 |
scanner home position not found | | 6030 |
E210 |
lens home position not found | | 6030 |
E212 |
lens home position not found | | 6030 |
E220 |
exposure lamp blown or bad contact | | 6030 |
E224 |
blank shutter not working | | 6030 |
E240 |
main board | | 6030 |
E244 |
main board to AC drive communication problem | | 6030 |
E400 |
ADF control board problem | | 6030 |
E401 |
DF paper feed motor lock | | 6030 |
E402 |
DF transport error | | 6030 |
E403 |
DF paper transport error | | 6030 |
E404 |
DF paper exit | | 6030 |
E411 |
DF sensors problem | | 6030 |
E500 |
Sorter control board | | 6030 |
E510 |
Sorter paper transport error | | 6030 |
E512 |
Sorter first motor lock | | 6030 |
E530 |
Stapler motor overloaded | | 6030 |
E531 |
Stapler motor overloaded | | 6030 |
E540 |
lateral movement motor lock | | 6030 |
E541 |
lateral movement motor lock | | 6030 |
E710 |
main board failure | | 6030 |
E711 |
main board failure | | 6030 |
E712 |
paper feed error | | 6030 |
E716 |
paper tray error | | 6030 |
E800 |
Auto shut-off relay malfunction | | 6030 |
E901 |
Paper feed unit electronic board | | 6030 |
E902 |
Paper feed unit home position error | | 6050, 6650, 8070, 8570 |
E000 |
Fusing unit not heating up | | 6050, 6650, 8070, 8570 |
E001 |
Fusing unit overheating | | 6050, 6650, 8070, 8570 |
E002 |
Fusing unit not heating up | | 6050, 6650, 8070, 8570 |
E003 |
Fusing unit not heating up | | 6050, 6650, 8070, 8570 |
E004 |
SSR or exposure lamp board | | 6050, 6650, 8070, 8570 |
E010 |
main motor lock, main motor rotation sensor,main board | | 6050, 6650, 8070, 8570 |
E011 |
main drive lock, one of the motors | | 6050, 6650, 8070, 8570 |
E013 |
used toner transport jammed | | 6050, 6650, 8070, 8570 |
E014 |
pick-up motor lock | | 6050, 6650, 8070, 8570 |
E020 |
black toner supply mechanism malfunction | | 6050, 6650, 8070, 8570 |
E030 |
Counter error | | 6050, 6650, 8070, 8570 |
E031 |
counter error at one option | | 6050, 6650, 8070, 8570 |
E050 |
duplex malfunction | | 6050, 6650, 8070, 8570 |
E051 |
duplex malfunction | | 6050, 6650, 8070, 8570 |
E202 |
scanner home position not found | | 6050, 6650, 8070, 8570 |
E203 |
scanner home position not found | | 6050, 6650, 8070, 8570 |
E204 |
scanner home position not found | | 6050, 6650, 8070, 8570 |
E210 |
lens home position not found | | 6050, 6650, 8070, 8570 |
E212 |
lens home position not found | | 6050, 6650, 8070, 8570 |
E240 |
main board failure | | 6050, 6650, 8070, 8570 |
E243 |
Operation panel | | 6050, 6650, 8070, 8570 |
E710 |
power supply error | | 6050, 6650, 8070, 8570 |
E711 |
power supply error | | 6050, 6650, 8070, 8570 |
E500 |
Sorter control board | | 6050, 6650, 8070, 8570 |
E510 |
Sorter paper transport error | | 6050, 6650, 8070, 8570 |
E512 |
Sorter first motor lock | | 6050, 6650, 8070, 8570 |
E530 |
Stapler motor overloaded | | 6050, 6650, 8070, 8570 |
E531 |
Stapler motor overloaded | | 6050, 6650, 8070, 8570 |
E801 |
thermistor, fusing unit, power supply, main board | | 6050, 6650, 8070, 8570 |
E802 |
power supply or main board error | | 6317 |
E000 |
Fusing unit not heating up | | 6317 |
E001 |
Fusing unit overheating | | 6317 |
E002 |
Fusing unit not heating up | | 6317 |
E003 |
Fusing unit not heating up | | 6317 |
E004 |
SSR or exposure lamp board | | 6317 |
E010 |
main motor lock, main motor rotation sensor,main board | | 6317 |
E030 |
counter error | | 6317 |
E202 |
scanner home position not found | | 6317 |
E208 |
mirrors home position not found | | 6317 |
E210 |
lens home position not found | | 6317 |
E220 |
exposure lamp blown or bad contact | | 6317 |
E245 |
main board | | 6317 |
E261 |
Main power supply or Main PCB | | 6317 |
E400 |
communication lost between copier and ADF | | 6317 |
E500 |
communication lost between copier and sorter | | 6317 |
E802 |
Main switch, main power supply | | GP200, GP215 |
E000 |
Fusing unit not heating up | | GP200, GP215 |
E001 |
Fusing unit overheating | | GP200, GP215 |
E002 |
Fusing unit not heating up | | GP200, GP215 |
E003 |
Fusing unit not heating up | | GP200, GP215 |
E007 |
fusing film damaged or out of position | | GP200, GP215 |
E010 |
main motor lock | | GP200, GP215 |
E030 |
counter error | | GP200, GP215 |
E031 |
counter error at one option | | GP200, GP215 |
E032 |
electronic counter error | | GP200, GP215 |
E051 |
horizontal registration home position not found | | GP200, GP215 |
E064 |
High voltage drive board abnormal output | | GP200, GP215 |
E100 |
BD error | | GP200, GP215 |
E110 |
polygonal mirror motor not picking up speed | | GP200, GP215 |
E190 |
RAM error | | GP200, GP215 |
E191 |
communicatio lost between the main board and the power
supply | | GP200, GP215 |
E202 |
scanner home position not found | | GP200, GP215 |
E203 |
scanner home position not found | | GP200, GP215 |
E204 |
scanner home position not found | | GP200, GP215 |
E210 |
lens home position not found | | GP200, GP215 |
E212 |
lens home position not found | | GP200, GP215 |
E220 |
exposure lamp blown or bad contact | | GP200, GP215 |
E240 |
main board | | GP200, GP215 |
E243 |
Operation panel | | GP200, GP215 |
E261 |
Main power supply or Main PCB | | GP200, GP215 |
E301 |
exposure intensity out of range | | GP200, GP215 |
E400 |
ADF control board problem | | GP200, GP215 |
E401 |
DF paper feed motor lock | | GP200, GP215 |
E402 |
DF transport error | | GP200, GP215 |
E403 |
DF paper transport error | | GP200, GP215 |
E404 |
DF paper exit | | GP200, GP215 |
E411 |
DF sensors problem | | GP200, GP215 |
E422 |
copier to DF-F1 communication lost | | GP200, GP215 |
E710 |
main board | | GP200, GP215 |
E711 |
main board | | GP200, GP215 |
E712 |
paper feed error | | GP200, GP215 |
E716 |
Paper feed unit error | | GP200, GP215 |
E717 |
communication to the copier controller is lost | | GP200, GP215 |
E800 |
Auto shut-off relay malfunction | | GP200, GP215 |
E803 |
power supply output out of range | | GP200, GP215 |
E901 |
Paper feed unit PCB malfunction |
|
